F22 Error Code Whirlpool Washer

First off what does F22 mean on whirlpool washer? It means there is a door lock mechanism error, so things you can do to fix the whirlpool washer f22 error are listed below.

In a Whirlpool washer, an F22 error code indicates that there’s a problem with the door lock assembly. If the door tries and fails more than six times to lock itself, the washer will display this error code.

Interested in purchasing an Extended Service Plan?

Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.

If everything you stated is acurate then the main control needs to be replaced on the washer. F-22 Code

1. Unplug washer or disconnect power. 2. Remove the lower kick panel. 3. Reach up along the inside of the front and locate the bottom of the door switch/lock unit. 4. Located on the bottom of the door switch/lock unit is a tear-drop shaped tab. 5. Gently pull the tab down about a ¼” or until a click is heard. 6. The door should be opened.

I have a model WFW9400SZ02 ser# CSY1201141. I dont see the model listed below. Do I need to look somewhere else for the model ? I have a code F-22 door wont open. When I power up the washer

I replaced the locking mechanism but i am still getting the flashing F-22 alarm. I looked at the wires and none of them were loose. I am missing the latches on the inside of the door that the locking mechanism connects too. Could that be the issue of why it is still flashing the alarm?

The F22 error is displayed when the door lock mechanism has attempted to lock the door at least 6 times with no success. This is most commonly caused by a failed door lock assembly. It could be other things like something in the way of the lock bolt engaging, a wiring issue or it could be the lock circuit in the main control board. Try and reset the control by unplugging the washer for a minute. If after plugging it back up the problem continues just replace the door lock mechanism since that is the most common issue. You can order the door lock assemlby from the link below, the page also shows how to change it out.

Frequently Asked Questions

  • Unplug the washer.
  • Remove the lower kick panel.
  • Reach up to find the door switch unit.
  • Gently pull the tear-drop-shaped tab at the bottom of the unit till a click is heard.
  • FAQ

    How do I fix F22 error on my Whirlpool washer?

    F22 indicates a front door lock issue. Try to following method to resolve: Select PAUSE/CANCEL twice to cancel the cycle.

    Possible Solutions
    1. Is the washer door firmly shut? …
    2. Verify there is no wash media (detergent, fabric softener, etc) built up around the door lock.

    What is F22 error in washing machine?

    The F22 error code means that there’s an issue with the door lock of your washer. Basically, when the main control attempts to lock the door six consecutive times and fails to do so, this code will be displayed.

    What does F22 code mean?

    A F22 error code is a common problem, and means that the water pressure on your boiler has fallen, and that it needs to be increased before the system will run again.

    How do I clear the error code on my Whirlpool washer?

    To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

    Related Posts