Kenmore Elite Refrigerator Setting Temperature

To regulate the temperature of the Kenmore refrigerator, choose the fridge temp and freezer temp buttons. Hold these for any couple of seconds before the display beeps. Press the fridge temp button and feel the available temperatures before you discover the 37 levels F setting.

Kenmore Elite Refrigerator Temperature The Kenmore refrigerator temperature control location reaches top of the back wall of within the refrigerator. The greater the Kenmore Smart Achieve refrigerator temperature control number is, the cooler the temperature is going to be.

At What Temperature Kenmore Elite Refrigerator Should Be?

The average temperature for a refrigerator is 37 degrees Fahrenheit. But it should be around 35 – 37 degrees; this creates a reasonable range for your fridge to be excellent.

This doesn’t mean you can’t go higher than 37 to either 38 or 39; you must keep it below 40° Fahrenheit.

But to be on the safer side, it should be at 37° F; this is the confirmed temperature for every refrigerator.

At this temperature, your Kenmore Elite refrigerator should depend on what you have inside.

This can be the quantity or type of foodstuff; these things can affect the refrigerator’s temperature.

These foodstuffs or snacks stocked in your refrigerator create warm spaces inside. This means more cool is required.

But when there are a few materials in the fridge, the mentioned temperatures are ok. And keep it at a mid-temperature; if you have much inside, you can take it to 34° F to make the fridge cooler.

According to the U.S food and drug administration, you should keep your refrigerator at a temperature of 40° F for proper food storage.

This is to keep your food items free from bacteria growth when inside the fridge.

Any degree above that at room temperature is conducive for bacterial growth.

For this reason, avoid keeping your refrigerator warm at room temperature for more than two hours when there is foodstuff inside.

When you purchase a Kenmore refrigerator, the temperature is set to 37°F from the factory, so after purchase plug, it in and wait for 24 hours before it gets to 37° F.

If a knob or control dial is available, you can easily control the temperature. The control dial is sometimes labeled 1 – 5 or 1 – 9; this depends on the refrigerator.

For a suitable temperature for your refrigerator, if it’s labeled 1 – 5, you can set it to 3. The coldest temperature is at number 5, so for a moderate temperature, it’s best at 3.

Also, when you notice that your items are not getting the chill you want, you can either increase by one or decrease to get a desirable result.

Failed Display Board

What it is: The display board on your Kenmore fridge serves two purposes.

Firstly, it displays the current set temperature for your appliance. Then, the fridge will cool itself down until it reaches that temperature. Once it does, its cooling system will shut off until it becomes too warm again.

Secondly, the display board is also where you input your temperature settings. You can raise or lower the set temperature based on your needs and preferences by pressing on it.

The display board works closely with the main control board. So, the display board will communicate the temperature settings to the main control board through electrical signals whenever you adjust the temperature settings.

How it fails: The display board will likely fail due to an electrical fault. For example, the board might no longer work after a power surge due to a thunderstorm. A short circuit could also cause the same outcome.

Lastly, regular wear and tear could also cause the display board to fail, especially if you’ve been using the fridge for many years.

How to fix: The solution to a failed display board is to replace it with a new one entirely.

Once you’ve ordered a compatible replacement, all you have to do is pry the display board from its bottom. That should be straightforward as no tabs are holding the display in place.

Next, disconnect the wire harness that connects the display to the fridge. Once that’s done, you can then take the new display board and connect its wire harness to the refrigerator.

Lastly, push the new display board firmly into place.

How do I run diagnostics on my Kenmore Elite refrigerator?

Go into the diagnostic mode by pressing and holding the Lock button for several seconds, then press and contain the Freezer and Refrigerator buttons while pressing the Acela Ice button 5 occasions. Digital display can have operating time (quantity of minutes it’s been connected).

FAQ

How do I set the temperature on my Kenmore refrigerator?

Kenmore Elite Refrigerator Temperature

The Kenmore refrigerator temperature control location is at the upper back wall of the inside of the refrigerator.

How do I change my Kenmore Elite to Fahrenheit?

The coldest temperature for a Kenmore refrigerator compartment is 33 degrees Fahrenheit (or zero degrees Celsius). However, its freezer compartment can go as cold as -9 degrees Fahrenheit (or -23 degrees Celsius).

Related Posts