What Does Pf Mean On Microwave

by

If a power failure should occur, a microwave, depending on the model, may display a “PF”, “888” or “8888” code. It is possible to see this display upon initial installation or after power was restored due to a power failure. What does it mean when a mobile phone is SIM free? what is the difference between sim-free and pay as you go.

If there is a power failure to the electrical supply to your home, when the power comes back on, you may see a “PF”, “888” or “8888” code in the display. Depending upon the model, one of these codes will appear in the display to indicate that the power failure has occurred.

How do you fix microwave PF?

Touch the “Clear” pad if you see “PF” or “8888” on the control display panel. These codes represent a GE microwave power failure. The codes will clear from the display and your microwave will now continue operating like usual. Press “Cancel” or “Clear/Off” if you see an “F” code displayed on your microwave.

How do I reset my Hotpoint microwave?

Hotpoint Microwave Won’t Start If there was a recent power surge, you may need to unplug your microwave and plug it back in to reset it. You may also need to replace a fuse or turn a tripped circuit breaker back to the “on” position.

How do you change the power level on a Hotpoint microwave?

Press TIME COOK. (Press POWER LEVEL. Select a desired power level 1–10.)

What does PF error code mean on LG?

The PF error code indicates a power failure. This may occur if the power supply to the washer is interrupted during a cycle from power outage. To fix this: Simply restart the washing cycle process.

What is a PF code?

A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure. Touch and hold START to restart the dryer cycle or press POWER to clear the display.

Why is my microwave keypad not working?

If the microwave key panel is not responding or working properly, check the following: Unplug microwave or turn off house circuit breaker for 30 seconds. Plug back in, or reset circuit breaker, and try reprogramming unit. Check the house circuit breaker.

Why does my oven say PF?

The “PF” indicates a power failure. This would be normal to happen when the circuit breaker was flipped OFF and back ON. The “Clock” must be set before all the other functions will be available. You will need to press “Clock” and set the clock and your oven should operate normally.

FAQ

How do you fix microwave PF?

PF, 8888 or F Codes
  1. Touch the “Clear” pad if you see “PF” or “8888” on the control display panel. …
  2. Press “Cancel” or “Clear/Off” if you see an “F” code displayed on your microwave. …
  3. Program the cooking function, which should clear the displayed codes.

What causes a GE microwave to stop working?

The most common cause for a microwave oven not working at all is a blown main fuse. The microwave main fuse will cut the flow of electricity if too much current passes through it.

What does PF mean on GE oven?

GE PF – Power failure (not a failure mode)

The manufacturer has assigned this error or fault code to indicate that the appliance lost power temporarily. Press CANCEL to clear the display.

What does it mean when my microwave says fail?

It may be a damaged power cord, a bad fuse, or a malfunctioning circuit board – all of which are issues with the microwave itself. This microwave failure may also be from a natural cause. Have there been any power surges or storms near you? That can cook the wiring in your appliance.