The use of glue allows pool noodles to be attached to one another. A clear adhesive like E6000, or ModPodge, can be used. As an illustration, it is best to use low-stress applications like this when gluing a flower or a ribbon.
What Are Pool Noodles Made Of?
Polyethylene. It is a closed-cell foam created by pressing together millions of tiny bubbles. Water cannot enter the foam cells, which makes it a fantastic pool toy. It is also light enough to float. Although the material flexes, it recovers from compression and keeps its shape.
You’ve probably seen polyethylene in packing materials. If you’ve ever worked on a plumbing project, you may have noticed that pool noodles and foam pipe insulation are the same thing.
Polyethylene foam can be difficult to recycle. Fortunately, pool noodles have a lot of uses besides swimming pools, so you can reuse them all over the garage and the house.
They’re so handy it’s worth keeping a few pool noodles around the workshop. And if you can’t find a pool noodle, you can always grab some pipe insulation at the hardware store.
The list below includes some of our favorite pool noodle tips.
Break out a pool noodle if you need to fill up a bucket that won’t fit under the sink’s faucet. Place the bucket on the ground, then run the noodle down to it by slipping it over the faucet.
Make this pool noodle wrist rest to prevent wrist fatigue after a long day at the home office.
First, mark where you want to cut the noodle. We created the height for the wrist rest to be slightly shorter than half the full noodle diameter. You could make two wrist rests of equal size by precisely halving the noodle.
A door banging into a wall is annoying. Even worse, it might dent your trim or poke a hole in your drywall. But with a little assistance from one of these foam miracles, that’s simple to avoid. Simply slit a short section of pool noodle lengthwise, and slide it onto the edge of a door, cabinet, or gate.
Although useful, drawer organizers frequently move when you open or close a drawer. Easily solve that problem with a pool noodle.
Measure the distance between the organizer’s back and the drawer’s back. Then cut the noodle to size with a utility knife. In order for the organizer to remain in place, the pool noodle must fit snugly. In order to save space, you could also cut the pool noodle in half lengthwise.
Here is a tried-and-true helpful tip for collecting water on your garage or basement floor. Put together this straightforward squeegee by rake tines and a piece of foam pipe insulation. Simply push the water out the door or into the drain after that. — Art Rooze.
Your drinks stay cool in the pool and are always nearby with this inexpensive, simple DIY pool accessory.
To fit a plastic container, cut pool noodles into short lengths. (A bin with a lip keeps the noodles in place. (To keep the noodles tightly fastened to the sides, thread a bungee cord through their centers. Tie a piece of rope or cord to the bungee for a handle. To make the handle easier to hold, add a small circle of pool noodles as a float.
I needed to pick up a ladder from a friend. I covered the bars with pool noodles to prevent the luggage rack on my new SUV from getting scratched up. I simply taped the pool noodles on after slicing them with a utility knife. The cushion of foam also kept the ladder from rattling. Before you leave, don’t forget to secure your cargo. – Gerald Ruppert
Sign up for our DIY Tips & Hints newsletter if you want more helpful tricks and advice from Family Handyman delivered to your inbox.
My car door had several dings from opening and hitting the wall of the garage. I was about to discard some pool noodles because my grandchildren had outgrown them when I realized that they might actually be useful.
I used a utility knife to cut the pool noodle in half and nailed it to the studs in my garage. The pool noodle should stay put on its own. Use construction cement or a few nails to attach the pool noodle to the studs for a more long-lasting fix. Voilá, no more door dings. — John Greene.
There is only one step to making them, so go make some today so you can connect and unconnect pool noodles repeatedly (way better than tape!). I’m proud to announce the drink koozie Pool Noodle Connectors were a success, and now I’m so excited to share them with you. Kids can connect pool noodles to make circles, arches, lines, or whatever else comes to mind.
Directions: 1. Draw a line from the bottom of your drink koozie to the bottom of your pool noodle. What a simple DIY, don’t you think? Just cut out the circle, and you’re ready to play.
What size PVC pipe fits in a pool noodle?
All you need to get started is a length of 1′′ diameter PVC pipe and some pool noodles (approximately 2 1/4′′ in diameter).
FAQ
How do you get pool noodles to stick together?
The noodles do melt when hot glue is used, but it does a good job of holding them together. Glue dots also work but doesn’t hold them firmly. I used the double-sided velcro to clamp everything in place as I was gluing the noodles together while waiting for the hot glue to cool.
Can I use hot glue on pool noodles?
You must first form a circle out of your noodle before you can begin crafting. I work my noodle to relax so I can do this. Smoosh it with your thumbs as you work it into a circle, twisting, bending, and breaking it down a little.
