How To Tighten Moen Kitchen Faucet Handle

A functional faucet is an essential part of every well-maintained kitchen. A popular brand of kitchen faucet is Moen. The brand offers functional kitchen faucet options in a vast variety. The Moen single handle kitchen faucet is one of these.

The Moen kitchen faucet may get loose over time and may need some care. Read ahead as we discuss how you can tighten a loose Moen single kitchen faucet handle and its base as well.

Re-Assemble the Moen Kitchen Faucet

How To Tighten Moen Kitchen Faucet Handle

You know how you took the faucet apart, and now you simply reverse the process.

  • Screw the cover back on the gearbox. Righty tighty does the trick.
  • Turn the end of the shaft pointing down. This will make it easy to fit the handle back on.
  • Put the handle back onto the shaft, making sure you have access to the hole that gives you access to the hex nut.
  • Insert the Allen wrench into the hole until it engages with the hex nut. It should require only a couple of turns to tighten. Again, a clockwise direction for that turn.
  • Finally, replace the cover over that hole. Your finger and thumb will be enough to accomplish this.
  • You’ve already ascertained the jiggle is gone, no more loose handle. You’ve made sure you didn’t tighten the mechanism too much, so turning the water lines on and off should be easy and smooth again.

    Use an Allen Wrench For The Hex Nut

    With the cap removed, insert the Allen wrench into the opening until you feel it fit into the hex nut inside the gear cover. Give it a turn or two counterclockwise (lefty loosey). You do not need to turn it more than that, only enough to loosen the handle for removal.

    Give the handle a little jiggle to feel it loosen, and when it feels “right” simply pull it out of the gear cover. Set it aside and out of the way.

    You will now be able to remove the gear cover by merely unscrewing it. Again, lefty loosey.

    Step 3: Tighten The Ring To Make The Faucet Handle Tight

    Finally, after removing the collar, you will notice a valve is held tight by a ring (usually brass but it can be any metal or plastic). You have to tighten the ring using any appropriate tool. Like you can use a knife or pry tool or whatever fits in it and try to make it tight in a clockwise direction.

    How To Tighten Moen Kitchen Faucet Handle

    But make sure don’t just make it too tight, otherwise, the faucet handle will be also tight. Try to keep it in the middle, not so tight nor loose. After that, attached all the parts accordingly back to their position and turn on the valves. That’s it.

    Now it’s time for the second problem to solve.

    FAQ

    How do you tighten a Moen kitchen handle?

    Pop the cap off with your fingers or by using a flat-head screwdriver. Underneath, you’ll find the set screw, which usually has a hex head. Tighten that screw and the handle will stop wiggling.

    How do you adjust a Moen faucet handle?

    Pop the cap off with your fingers or by using a flat-head screwdriver. Underneath, you’ll find the set screw, which usually has a hex head. Tighten that screw and the handle will stop wiggling.

    How do you tighten kitchen faucet handles?

    Pop the cap off with your fingers or by using a flat-head screwdriver. Underneath, you’ll find the set screw, which usually has a hex head. Tighten that screw and the handle will stop wiggling.

    Where is the set screw on a Moen kitchen faucet?

    Pop the cap off with your fingers or by using a flat-head screwdriver. Underneath, you’ll find the set screw, which usually has a hex head. Tighten that screw and the handle will stop wiggling.

    Related Posts