Frigidaire appliances have been around since the company introduced its first refrigerator in 1916. Frigidaire has expanded its product line since then to include a variety of different kitchen appliances, including the Frigidaire oven. The Frigidaire error code system for the oven only has two error codes, F1 and F3. Each code corresponds to a particular kind of malfunction and shows on the display screen as soon as the ovens memory detects an error. Push the “Clear Off” button to clear the screen and stop the alarm, and reprogram the oven. If the code remains, repairs are necessary.
The F1 code indicates a control failure. Try pressing a key to see if it displays on the screen. If not, the keypad may have shorted and requires replacement. If the keypad is fine, there is perhaps a problem with the internal checksum, or computer data; disconnect the power for 30 seconds and reconnect it. If the code remains, you must replace the electronic oven control, or EOC for short. If the F1 code appears when the oven is running, it means that the oven senses an overheating condition. Use an external thermometer to check the temperature inside the oven. If it is accurate, it means that either the temperature sensor probe or the control relay has malfunctioned. Disconnect the power, and inspect the sensor probe, replacing it if necessary. If the oven is actually overheating, replace the EOC. If the oven is allowed to overheat, the resulting damage will possibly be so extensive that the entire oven may require replacement.
The F3 error code implies an oven probe malfunction. The problem is most likely an open or shorted resistance temperature detector, sensor probe or wiring issue. In fact, if the RTD sensor probe is open, the display may show an F1 error code, thinking there is an overheating problem. Inspect all of the wiring involving the RTD sensor probe, keeping an eye out for shorts and open conditions. If the wiring appears fine, test the RTD resistance at room temperature with a multimeter and compare it to the probe resistance chart on the appliances service data sheet. If the reading is off, replace the sensor probe.
Attempting any repair that involves opening the ovens back panel can result in a voided warranty, as can the unauthorized replacement of parts. For safety, have all repairs performed by a repair center. If your warranty has expired and you want to attempt repairs yourself, always unplug the oven first, wait for a hot oven to cool down, observe all posted warnings and never touch exposed wires.
Shopping CartYour shopping cart is empty
Choose a symptom to see related range repairs.
How do you reset Frigidaire stove?
The fundamental factor you could do is try to carry out a hard reset by unplugging the Frigidaire oven, waiting about 20 seconds, after which plugging it in again. Generally, this is enough to reset the control board and obtain your oven working again.
Where is the temperature sensor on a hot tub heater?
The whirlpool oven sensor protrudes from the back of the oven and is connected to the oven thermostat. When the element is heated, the sensor registers the ambient temperature in the oven.
How do I fix error F31?
An L2 (Low or No Line Voltage) Error code indicates that there may be a problem with your home power supply, keeping the dryer’s heater from turning on.
What is an F31 error code?
How do you reset a Frigidaire oven control board?
What does F 30 mean on an oven?