If your washing machine doesn’t seem to be working correctly, a quick way to resolve the issue is to issue a reset. This will reboot the machine and can eliminate any small faults the appliance is experiencing.
We’ll walk you through seven different methods you can use to reset your Whirlpool washing machine. Choose one and give it a go!
If your washing machine isn’t working correctly, you can reset it by pressing a combination of buttons. Whirlpool machines don’t have a separate reset button, but this is just as good. Press the pause/cancel button twice. Press the power button once. Listen out for a beep or the display panel to flash. This indicates the machine has been reset. Table of Contents
How to Reset Whirlpool Cabrio Washer “Option-1”
Whirlpool Cabrio touch screen washer reset
Always turn the device off. This is the most important step to reset the Whirlpool Cabrio washing machine’s touchscreen. Of course, the biggest reason for this is to ensure that you are safe and there is no risk of any parts short-circuiting. Simply turn off the main electricity supply or remove the plug.
Open and Close the Lid
This is a handy technique for top loading Whirlpool washers.
If you’re using a commercial or communal washing machine, this is easy to try. But we recommend contacting the laundromat if you notice a machine that isn’t working correctly.
FAQ
How do I reset my Cabrio touchscreen washer?
Or you can press PAUSE/CANCEL. Choose a cycle and press START. Then disconnect the Cabrio from power if you see the issue or error come back. Wait five minutes.
How do I reset my Whirlpool washer touchscreen?
- Turn the washing machine off manually via the control panel.
- Turn the dial to the Normal cycle setting.
- Turn the dial counterclockwise until it clicks once.
- Turn the dial clockwise for three ticks.
- Turn the dial counterclockwise for one click.
How do I reset my Whirlpool Digital washer?
- Turn the washing machine off manually via the control panel.
- Turn the dial to the Normal cycle setting.
- Turn the dial counterclockwise until it clicks once.
- Turn the dial clockwise for three ticks.
- Turn the dial counterclockwise for one click.
How do you put a Whirlpool Cabrio washer in diagnostic mode?
- Turn the washing machine off manually via the control panel.
- Turn the dial to the Normal cycle setting.
- Turn the dial counterclockwise until it clicks once.
- Turn the dial clockwise for three ticks.
- Turn the dial counterclockwise for one click.
